- Pumps[10]
- Lubrication System[1]
- Flow Meters[7]
- Fuel Systems[7]
- AC Motor[1]
- Contact Person : Mr. chen henry
- Company Name : Wenzhou Haiwan Pump Co., Ltd.
- Tel : 86-577-67953987
- Fax : 86-577-67498888
- Address : Zhejiang,wenzhou,No 7 center road Meiao Qiaoxia
- Country/Region : China
- Zip : 325102
Oval Gear Flow Meter
LC Gear Flowmeter Meter
LC gear flowmeter are widely used in flow measurement in the industrial field such as petroleum exploitation, oil refinery, chemical and oil storage.
Mode | LC-15 | LC-20 | LC-25 | LC-40 | LC-50 | LC-80 | LC-100 |
DN (mm) | 15 | 20 | 25 | 40 | 50 | 80 | 100 |
Min. Flow Rate m3/h | 0.3 | 0.3 | 0.6 | 1.6 | 5 | 6 | 10 |
Max. Flow Rate m3/h | 1.6 | 3 | 6 | 16 | 25 | 50 | 80 |
Accuracy % | +-0.3~+-0.5 | ||||||
Working Temperature oC | -10~80 | ||||||
Pressure MPa | 1.0-6.3 | ||||||
Liquid Viscosity MPa.s | 2~75 | ||||||
Min. Scale Value L | 0.1 | 1 | 10 | ||||
Register Amount m3 | 999.99 | 9999.9 | 99999 | ||||
Electric Turbine flow meter
digital turbine flowmeters are best suited for petroleum based products. The modular design allows for maximum flexibility in meeting customer’s applications. Models are available with NPT/BSP or flange fittings.
Features:
High precision, durable and compact turbine flowmeters.
Modular design allows for use with Output Modules, Sensors and Remote Transmitters.
Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate.
Internal parts are simple to replace for easy maintenance.
Lightweight, compact design allows for easy installation.
Powered by Lithium batteries for approximately 9,000 hours.
Specification:
Fitting Type: | NPT or ISO (Female) | ||
Housing Material: | Aluminum | ||
Meter Sizes Available: | 3/4” 1” 1-1/2” | ||
Flow Range: | 3/4” | 2 - 20 GPM (7.6 - 75.7 LPM) | |
1” | 5 - 50 GPM (18.9 - 190 LPM) | ||
1-1/2” | 10 - 100 GPM (38.0 - 380 LPM) | ||
Accuracy (% of Reading): | Turbine Only | Turbine w/Computer | |
3/4” | ± 1.5% | ± 1.0% | |
1” | ± 1.5% | ± 1.0% | |
1-1/2” | ± 1.0% | ± 0.75% | |
Repeatability: | ± 0.1% | ||
Pressure Rating: | 300 PSI / 21 BAR | ||
Operating Temperature Range: | -40°F to +250°F (-40°C to +121°C) | ||
Typical K-Factor: | 3/4” | 1,100 | |
1” | 565 | ||
1-1/2” | 215 | ||
Wetted Materials: | Housing: | Aluminum | |
Bearings: | Ceramic | ||
Shaft: | Tungsten Carbide | ||
Rotor: | PVDF | ||
Rings: | 316 Stainless Steel | ||
Frequency Range: | 3/4” | 37 - 370 Hz @ 2 - 20 GPM | |
1” | 47 - 470 Hz @ 5 - 50 GPM | ||
1-1/2” | 36 - 360 Hz @ 10 - 100 GPM | ||
Recommended Strainer Size: | 3/4” | 55 mesh | |
1” | 28 mesh | ||
1-1/2” | 55 mesh | ||
Maximum Flow: | 3/4” | 30 GPM (113.6 LPM) | |
1” | 75 GPM (284 LPM) | ||
1-1/2” | 150 GPM (568 LPM) | ||
Oval Gear Flow Meter
